Digital Assets
Blockchain Makes Wind Turbine Data Tamper-Evident

Key PointsBlockchain gives wind farm telemetry tamper evidence that centralized SCADA systems…
View more
- Blockchain gives wind farm telemetry tamper evidence that centralized SCADA systems cannot provide.
- A per-turbine hash chain rejects forged or out-of-order windows before they are committed.
- Hyperledger Fabric absorbs added turbine load as latency rather than proportional throughput growth.
In the past few decades, wind power has become one of the world’s most important renewable power generation methods, in large part driven by the passive push for solar + wind power in China.

In total, wind accounted for about 20% of global renewable capacity additions, which increased by 16% to a record 800 GW.
With a record 165 GW of new capacity in 2025, this was a 40% increase over the previous record year. Wind capacity is expected to keep growing, with 969 GW of additional wind capacity forecast globally between 2026 and 2030, averaging about 194 GW per year.
These machines are, however, massive and therefore rely heavily on supervisory control and data acquisition (SCADA) systems. They also use a lot of industrial Internet of Things devices to monitor turbine performance, collect sensor data, and optimize operational efficiency.
This helps optimize and secure wind turbines, but also creates new vulnerabilities.
“As data exchange increasingly occurs over networked infrastructures, concerns related to data integrity, security, and trust have increased significantly in wind farms. Because cyber and physical layers are interdependent, disruption of communication links can directly reduce the observability and controllability of physical components, amplifying integrity and trust concerns in operational telemetry transfer.”
For this reason, a new study by Canadian researchers at Concordia University and Lakehead University proposes to leverage blockchain technology to create more secure telemetry.
They used Hyperledger Fabric to provide a tamper-evident communication and recording layer for transmitting wind turbine data.
They published the proposed blockchain architecture in Cyber-Physical Energy Systems1, under the title “Integrity-assured wind farm telemetry transfer using permissioned distributed ledger”.
Wind Turbines Also Produce Data
Vital Data Are Also Cybersecurity Risks
While power generation is obviously the most important output of wind farms, they also produce a constant stream of data. Most wind farms are managed through remote, continuous monitoring, which can detect any issue quickly.
This makes them vulnerable to cyberattacks. For example, in March 2019, a denial-of-service (DoS) incident affected communication between a control center and wind generation sites in Utah, U.S., and caused unexpected device reboots after a firewall vulnerability was exploited. Or in February 2022, the KA-SAT/Viasat incident disrupted remote monitoring access to about 5800 wind turbines (WTs) in Germany.
A key issue is that existing centralized data management can expose wind farms to single points of failure, unauthorized data modification, and limited transparency across operational stakeholders.
This, in turn, gives a strong advantage to decentralized alternatives like blockchain-based technologies.
Wind & Blockchain
Within the wind energy domain, wind-focused blockchain studies have mainly followed two directions.
The first direction emphasizes traceability and accountability across the lifecycle of physical assets. This can take the shape of assigning a unique identifier to every single wind turbine bolt. Or having every key lifecycle event, including registration, fastening, inspection, replacement, and recycling, recorded on an Ethereum (ETH ) -based blockchain using Solidity smart contracts.
The second direction combines blockchain with wind-specific data workflows, monitoring, and coordination. But until now, only relatively low-rate monitoring has been considered.
The researchers in this study propose instead to use a framework based on Hyperledger Fabric v2.5.4. It works as a permissioned, tamper-evident communication and recording layer, while introducing a per-turbine stream-continuity mechanism tailored to sequential telemetry.
Hyperledger Fabric was chosen because, among permissioned platforms, Hyperledger Fabric satisfies all three key requirements:
- Controlled membership, since turbine-side IPCs, peers, and control room clients are known entities whose identities must be verifiable.
- Deterministic finality, since committed windows must not be reverted once accepted, to preserve the integrity of the audit trail.
- Sustained throughput, since the framework must commit one window per turbine across all participating turbines concurrently. Hyperledger Fabric authorizes up to approximately 3500 TPS in benchmark configurations.
How Does It Work?
Each submission carries a sequence number and a hash reference to the previously accepted window of the same turbine, forming a per-turbine hash chain that is verified during endorsement before commit.
“Windowing serves not only to reduce transaction load, but also to define the integrity unit over which stream continuity is enforced.”
The communication standard IEC 61400-25 was used to define the supervisory communication context in which the proposed blockchain layer is inserted: in-farm telemetry path between turbine-side devices and the WF control room. For this project, the SCADA-exported telemetry is treated as a 1-Hz time series per turbine (one “event” per second).

Source: Cyber-Physical Energy Systems
When a new record is written to Hyperledger Fabric, it follows a fixed pipeline. The goal is to commit only authorized updates and to ensure that all peers store the same ordered history.
This process works in steps:
- A client prepares a transaction request.
- Selected peers simulate the request by running the smart contract (chaincode) and return signed approvals (endorsements).
- The client submits the endorsed transaction to the ordering service.
- The ordering service establishes one global order and packages transactions into blocks.
- Peers validate each block against network rules and then append valid transactions to their ledgers.
Testing The Concept In Simulation
Building A Tamper-Proof Record
Using a simulated wind farm, the researchers tested how this technology could be deployed, using 24 turbine-associated peer nodes and four orderer nodes.
The process follows sequential steps.

Source: Cyber-Physical Energy Systems
First, incoming samples are grouped into fixed-duration windows. Each turbine produces one window at a time, and each window is submitted as one blockchain transaction.
Second, to ensure continuity of each turbine stream, each window includes integrity fields that link it to the previously accepted window of the same turbine.
Third, the submission is then sent to the Hyperledger Fabric network on the application channel. Endorsing peers execute the chaincode (smart contract) and validate the submitted window against the latest committed state for that turbine. If the submitted window is invalid, endorsement fails, and the transaction cannot be committed.
Fourth, the client forwards the endorsed transaction to the ordering service if it is valid.
Lastly, the ordering service distributes blocks to channel peers for validation and commit.

Source: Cyber-Physical Energy Systems
With this system, integrity is provided in two layers:
- Hyperledger Fabric provides tamper evidence after commit through its block hash chain.
- The per-turbine hash chain enforces stream continuity by rejecting forged or out-of-order windows during endorsement before commit.
Performance Evaluation
In the simulation, one turbine client submits 200 windows sequentially, one per second. Other configurations with 0.5 s and 2 s are also tested.
This can allow more (or fewer) transactions to accumulate before blocks are cut, and higher-rate sensing by aggregating multiple samples into each window.
They tested if the design could handle more turbines.
“Throughput increases only slightly, from 10.40 TPS at 24 turbines to 11.13 TPS at 100 turbines, while mean latency increases from 1608 ms to 5764 ms and p99 latency reaches 9459 ms.”
The results indicate that additional concurrency is absorbed primarily as queueing and commit delay rather than yielding proportional throughput growth.
So the use of multi-channel deployment as a practical scale-out strategy for larger WF telemetry workloads is realistic, an important factor when the largest real wind farm can be hundreds of turbines.
Integrity Evaluation
As this blockchain application is mostly justified by the improved cybersecurity aspect, proving it is safe is important.
It considers two types of attacks:
- An active attacker who can submit forged or out-of-order windows on the IPC-to-ledger path.
- A disk-level attacker who tampers with a peer’s local block store after commit.

Source: Cyber-Physical Energy Systems
In the first case, the hash chain prevents out-of-order or tampered continuation of each turbine’s stream even if an attacker can submit arbitrary transactions.
This check enforces per-turbine continuity, but it does not validate the physical correctness of measurements if an attacker can submit correctly chained values.
In the second case, a disk attacker can corrupt a single peer’s local history, but the corruption is detectable because it produces a cross-peer block-bytes mismatch. So clients can reject the result and rely on an untampered peer’s replicated ledger.
Investors Takeaways
With blockchain, it is often easy to forget that this technology is not just limited to cryptocurrencies, but is a tamper-proof ledger applicable for all sorts of use cases. This study proves that it can be used in energy applications as well, not just in supply chain tracking, but in continuous monitoring and integrated into industrial IoT (Internet of Things).
Especially as AI makes cyberattacks at scale easier than ever, tamper-proof ledgers are going to be increasingly valuable, especially for monitoring billion-dollar worth of strategic assets.
“Blockchain’s digital record offers insight into the framework behind AI and the provenance of the data that it is using, addressing the challenge of explainable AI. This insight helps improve trust in data integrity and in the recommendations that AI provides. Using blockchain to store and distribute AI models provides an audit trail, and pairing blockchain and AI can enhance data security.”
IBM – Blockchain & AI.
So this study provides a concrete engineering story beyond speculative blockchain applications.
The commercial opportunity depends on whether developers can deliver that assurance at acceptable latency, storage cost, and operational complexity, including for the largest wind farms.
Investing In Enterprise Blockchain
IBM
IBM Price Chart
IBM’s support for the Hyperledger platform was formerly known as IBM Blockchain Platform. The Hyperledger Fabric platform itself used in this study is an open-source, enterprise-grade permissioned distributed ledger technology (DLT) framework managed by the Linux Foundation.
It is a good example of the role IBM plays in promoting enterprise-grade blockchain technology, moving from the more retail-focused generalist blockchain technology to an enterprise permissioned network structure.
“This offering is ideal for the customers who want to deploy their components, store their data, or run their workloads on their own infrastructure or across public and private clouds for security, risk mitigation or compliance reasons. Clients can build, operate, and grow their blockchain networks with an offering that can be used from development through production.”
Where IBM provides additional help is in helping organizations join the same distributed consortium across entirely different environments, like different cloud providers (AWS, Azure, Google Cloud, etc.), on-premises local data centers behind firewalls, etc.
So while it does not mean that a wind farm interested in using Hyperledger for its telemetry would necessarily rely on IBM, it shows what kind of use case IBM involvement with blockchain technology can unlock.
Besides Hyperledger, IBM has been promoting its “IBM Digital Asset Haven”. It is a platform that helps heavily regulated industries (banking, government, etc.) manage cryptographic keys, issue digital currencies, and tokenize physical or financial assets.
Besides blockchain, IBM is a tech giant mostly focused on integrating multiple IT technologies together, from hybrid cloud to open source AI, enterprise software, and specialized consulting.
The company is also an R&D leader in AI, neuromorphic chips, quantum computing & photonics, putting it in a solid position to hold key IP for the next stages of computing technology.
Overall, IBM is a strong tech company in computing in general, with strength in enterprise solutions & services and bleeding-edge technological innovation.
(You can also read more about IBM in our investment report dedicated to the company)
Latest IBM (IBM) Stock News and Developments
Study Referenced
1. Arvin Asrari Ershad. Integrity-assured wind farm telemetry transfer using permissioned distributed ledger. Cyber-Physical Energy Systems. 26 October 2026. 10.1016/j.cpes.2026.05.004











